Inicio Equipos Ofertas Pedidos Curvas Sultana Calendarios Contacto

BOMBAS PARA FUENTES Y CASCADAS


CLAVE 483

Catálogo 523500
 
* 430 lph @ 0.5 mts.
* Altura máxima: 1.40 mts.
* Entrada lisa
* 1/4" Descarga MNTP
* Cable: 1.8 mts.
* Motor con protección térmica
* Opera inmersa solamente

CLAVE 484

Motor 1/200 HP Oil filled
Maximun flow rate 170 GPH @ 1'
Maximun head 7'
Intermittent Liquid Temp. to 120° F
Intake Smooth sump type
Discharge 1/4" MNTP
Housing Epoxy coated cast aluminum
Cover Epoxy coated cast aluminum
Volute Polypropylene
Impeller Polypropylene
Shaft seal Nitrile
Screen Polypropylene

CLAVE 485

* 720 lph @ 0.5 mts.
* Altura máxima: 2.25 mts.
* Entrada en la base
* 1/4" Descarga MNTP
* Cable: 1.8 mts.
* Motor con protección térmica
* Opera inmersa solamente

CLAVE 497

Catálogo 505501
 
* 4000 lph @ 1.0 mts.
* Altura máxima: 7.92 mts.
* Potencia máxima de 1/6 HP
* 1" descarga FNTP se surte con adaptador para manguera de jardín
* Cable: 5.48 mts.
* Motor con protección térmica

CLAVE 498

* Automatic or manual operation
* Epoxy coated die-cast aluminum housing
* Oil-filled motor
* 26.3' maximum lift
* 380 watts
* 1" FNPT discharge
* Thermal overload protection
* ASP On level: 6"–9", Off level: 1"–4"
* ASP-LL On level: 2"–3", Off level: ½"–1½"
* Piggyback diaphragm switch
* For submersible use only

BOMBAS DUALES


CLAVE 486

Catálogo 502500
 
* 940 lph @ 0.5 mts.
* Altura máxima: 3.71 mts.
* 3/8" Entrada FNTP
* 1/4" Descarga MNTP
* Cable: 1.8 mts.
* Motor con protección térmica
* Opera en línea o inmersa

CLAVE 487

Catálogo 503500
 
* 1620 lph @ 1.0 mts.
* Altura máxima: 5.27 mts.
* 1/2" Entrada FNTP
* 1/4" Descarga MNTP
* Cable: 1.8 mts.
* Motor con protección térmica
* Opera en línea o inmersa

BOMBAS PARA AGUAS RESIDUALES


BIG JOHN PUMP

CLAVE 233

Motor 3/10 HP Shaded Pole
Maximun flow rate 46 GPM @ 5'
  174 LPM @ 152m
Maximun head 18' ............ 5.5m
Intermittent Liquid Temp to. 140°F ......... 60°C
Discharge 1 1/2" FNTP (38.1mm)
Adapter 1 1/4" FNTP (31.7mm)
Housing Epoxy coated cast iron
Cover Polypropylene
vOLUTE Polypropylene
Impeller Nylon
Shaft seal Carbon/Ceramic
Bearings Upper an lower
Sintered sleeve bearings
Operation  
6-CIA Automatic
6-CIA-RFS Manual or Automatic
Activator  
6-CIA Diaphragm switch

BIG JOHN PUMP

CLAVE 234

Motor 1/12 HP Oil filled heavy duty
Maximun flow rate 810 GPM @ 1'
Maximun head 24.5'
Intermittent Liquid Temp. to 120° F
Intake 3/4 FNTP
Discharge 1/2" MNTP
Housing Epoxy coated cast aluminum
Cover Epoxy coated cast aluminum
Volute Nylon
Backplate Aluminum
Impeller Nylon
Shaft seal Viton
Screen Polypropylene
Electrical  
504203 115 V, 60 Hz, 3.5 A
Thermal overload protection 6' powerd cord
504216 230V, 50/60hZ, 1.8/1.6A
Thermal overload protection 12' power cord (w/o plug)

BOMBAS PARA DESAGÜAR TRAGASÓLIDOS CON PASO DE ESFERA


ELIMINATOR

CLAVE 235

  • 1/2 hp PSC motor with thermal overload protection
    • Energy saving low amp draw
    • Cooler running motor which extends the life of the pump
  • Cast iron pump housing with protective epoxy coating for corrosion and rust resistance, cast iron base
  • Stainless steal screws, bolts and handle
  • Mechanical seals (stainless steal spring, nitrile parts, carbon and ceramic faces)
  • Upper and lower ball bearing
  • 1-1/2" FNTP discharge
  • Fully submersible
  • Handles liquid and solid waste materials up to 3/4" diameter
  • Available in manual or automatic operation
  • Piggyback machanical float switch
    • On level 9" - 14"
    • On level 2" - 6"
  • Integral float switch
    • On level 9" - 12"
    • On level 3" - 6"
  • Two year waranty


ELIMINATOR CLAVE 238 115 V 1F

CLAVE 239 220 V 1F

Motor 1/2 HP Permanent Split Capacitor
Maximun flow rate 100 GPM @ 10'
  379 LPM @ 3m
Maximun head 25' ............ 7.6m
Solids handling (dia) 2" ................. 51mm
Interpreted Liquid Temp. to 140°F .................. 60°C
Discharge  
514320 2" (51mm) FNTP
514321 2" (51mm) FNTP
514420 3" (76mm) FNTP
Housing Epoxy coated cast iron
Cover Epoxy coated cast iron
Volute Epoxy coated cast iron
Impeller Two vane non-clog
  epoxy coated cast iron
Shaft Seal Carbonic/Ceramic
Bearings Upper and lower ball bearings
Operation Manual
Electrical  
514320 115V, 60Hz, 11.6 amps.
  20' (6m) power cord.
514321 208-230V, 60Hz, 4.6 amps.
  20' (6m) power cord.
514420 115V, 60Hz, 11.6 amps.
  20' (6m) power cord.

ELIMINATOR

CLAVE 240

Motor 1 HP Permanent Split Capacitor
Maximun flow rate 160 GPM @ 10'
  606 LPM @ 3m
Maximun head 35' ............ 10.7m
Solids handling (dia) 2" ................. 51mm
Interpreted Liquid Temp. to 140°F .................. 60°C
Discharge 3" (76mm) FNTP
Housing Epoxy coated cast iron
Cover Epoxy coated cast iron
Volute Epoxy coated cast iron
Impeller Two vane non-clog
epoxy coated cast iron
Shaft Seal Carbonic/Ceramic
Bearings Upper and lower ball bearings
Operation Manual
Electrical  
514620 230V, 60Hz, 11 amps.
  20' (6m) power cord.
514625 200-208V, 60Hz, 11 amps.
  20' (6m) power cord.
514630 230V, 60Hz, 11 amps.
  40' (6m) power cord.
514720 230V, 60Hz, 6.3 amps., 3PH*
514730 460V, 60Hz, (380V/50Hz)
  3 amps., 3PH*
  20' (6m) power cord.
514740 575V, 60Hz, 2.5 amps. 3PH*
  20' (6m) power cord.
514750 200-208V, 60Hz, 6.8 amps.
  3 PH* 20' (6m) power cord

MAGNUM

CLAVE 243 220 V 1F

CLAVE 244 220 V 3F

Motor 2 HP Capacitor start on single phase
Maximun flow rate 205 GPM @ 10'
  776 LPM @ 3m
Maximun head 77' ............ 23.5m
Solids handling (dia) 2" ................. 51mm
Interpreted Liquid Temp. to 140°F .................. 60°C
Discharge 3" (76mm) FNTP
Housing Epoxy coated cast iron
Cover Epoxy coated cast iron
Volute Epoxy coated cast iron
Impeller Bronze
Shaft Seal Carbonic/Ceramic
Bearings Upper and lower ball bearings
Operation Manual
Electrical  
520100 230V, 60Hz, 17.5 amps.
  20' (6m) power cord.
520125 200-208V, 60Hz, 14.5 amps.
  3PH* 20' (6m) power cord
520150 230V, 60Hz, 12.6 amps., 3PH*
  20' (6m) power cord.
520175 460V, 60Hz, 6.1 amps., 3PH*
  20' (6m) power cord.
 
No tienes instalado Flash Player

Copyright 2012 © Sultana Internacional, S.A. de C.V.
Edison Nte. 1446A Monterrey, N.L., CP 64480
Tels: +52 81 8333-1636, 8333-4549, 8348-5963, 8123-0607
E-mail: ventas@bombasultana.com, info@bombasultana.com

Copyright 2012 © Sultana Internacional, S.A. de C.V.
Inicio | Equipo | Ofertas | Pedidos | Gráficas | Extras | Contacto